★★★★★
"Serviceman was very upfront with me on the work and gave me several options to choose from."
Steve P.
No heat on a sub-zero Bloomington night? We've served Bloomington since 1988, with crews staged just up I-494, so most no-heat calls in 55420, 55425, 55431, 55435, 55437, and 55438 are out the door same day. Firm written quote first, no upsell, family-owned since 1988.
Fill this out and a real person calls you back within an hour, not a call center.
We've served Bloomington since 1988, with crews staged just up I-494 and quick access via I-35W, Highway 77 (Cedar Ave), Highway 100, and Highway 169, so most no-heat calls are a short run even in January. We're also a City of Bloomington Certified contractor, formally approved for mechanical permits here, which means our techs already know the local code and the inspection process. Whether you're in a mid-century rambler in Oxboro or East Bloomington, a larger home in West Bloomington near Hyland, or a place close to Normandale or the Penn-American District, we know the housing stock and the way a Minnesota cold snap finds the weak point in an aging furnace.
We've been repairing gas furnaces, high-efficiency systems, and heat pumps for Bloomington families since 1988. The approach hasn't changed: diagnose the real problem, explain the fix in plain English, write a firm quote, and only then do the work. Safety comes first on heating calls, if we find a cracked heat exchanger or a carbon monoxide risk, we'll tell you straight. And if the repair isn't worth it, you'll get a FREE second opinion before anyone talks replacement.
Furnace won't fire, often an igniter, flame sensor, control board, or thermostat issue. The #1 winter call.
Blower runs but the air is cold, usually a failed igniter, dirty flame sensor, or a lockout from a safety switch.
Furnace turns on and off every few minutes, often a clogged filter, overheating limit switch, or flame-sensor problem.
Vents barely pushing air, a failing blower motor, bad capacitor, or a duct restriction starving the system.
A loud boom when the burners light usually means delayed ignition, gas building up before it catches. Get it looked at fast.
Rotten-egg odor near the furnace is a safety issue. Leave the house, call your gas utility or 911, then call us.
A healthy burner flame is steady and blue. Yellow or flickering can signal a combustion problem and carbon monoxide risk.
Heating bill jumping with no weather change? The furnace is losing efficiency, sometimes a tune-up, sometimes a real repair.
One honest quote at a time, for 30+ years. Here's what sets our repair service apart from the big-box companies.
Written repair cost before we touch a tool, never a bigger bill at the end.
Our shop sits just east on I-494, so most Bloomington no-heat calls are handled same day, even on sub-zero nights.
MN Mechanical Contractor License #MB739673, and a City of Bloomington Certified contractor for mechanical permits. Fully bonded and insured.
Already been quoted a new furnace? We'll assess at no charge and tell you straight whether you actually need it.
We check the heat exchanger and combustion on every no-heat call. If there's a carbon monoxide risk, you'll know.
Headquartered just east in Eagan since 1988. Same family. Same standards. Same phone number.
Four steps. No surprises. Same process whether you need a $200 fix or a full system diagnosis.
Call when the heat quits, we prioritize no-heat calls and usually reach your Bloomington home the same day. We confirm an arrival window before we hang up.
Licensed tech checks ignition, gas, airflow, controls, and the heat exchanger, not just the obvious symptom.
Written, itemized repair price. If repair costs approach replacement, we'll say so honestly and give you both options.
Most repairs done in one visit. Work backed by warranty. We check in after the job to make sure it's running right.
Most furnace repairs in Bloomington fall in the $150–$650 range, a flame sensor might run $150–$250, a hot-surface igniter $200–$350, a blower motor $450–$850. Bigger jobs (control board, inducer motor, gas valve) can run higher, and we'll always walk you through repair-vs-replace math before you commit, especially on the older systems common in East Bloomington and Oxboro.
Been told you need a whole new furnace? Let us take a look before you spend thousands. No cost, no pressure, no obligation.
Claim Your 2nd OpinionWe'll be there within 24 hours of your call, and most Bloomington no-heat calls are handled same day.
"Serviceman was very upfront with me on the work and gave me several options to choose from."
"Wonderful experience, super sharp tech that explained everything and was very thorough, when I need new equipment it will be purchased through them."
"From the initial call and appointment to the new furnace installation (ours was 52 yrs old) the whole crew has been easy to work with and informative."
Real questions from real Bloomington customers. Got one we missed? Just ask.
Every badge is more than a logo, it's a verifiable standard that holds us accountable.
30+ years of Better Business Bureau accreditation with the highest possible rating.
National Comfort Institute certified, trained in performance-based diagnostics.
Family-owned and operating in the Twin Cities since 1988. Same family, same standards.
Approved contractor for HVAC permits and mechanical work right here in Bloomington.
Fill out the form or give us a call. A real person (not a call center) will get back to you the same day.
We'll be in touch within one business day, or same day during a no-heat emergency.
Copyright © Bob Boldt HVAC. All Rights Reserved. License: #MB739673. Privacy Policy
